Modulo:Val

-- For Template:Val, output a number and optional unit.
-- Format options include scientific and uncertainty notations.

local numdot = ','  -- decimal mark (use ',' for Italian)
local numsep = ' '  -- group separator (use ' ' for Italian)
local mtext = {
	-- Message and other text that should be localized.
	['mt-bad-exponent'] =       'parametro exponent (<b>e</b>)',
	['mt-parameter'] =          'parametro ',
	['mt-not-number'] =         'non è un numero valido',
	['mt-cannot-range'] =       'non si può usare un intervallo se il primo parametro include "e"',
	['mt-need-range'] =         'nel parametro ci deve essere un intervallo valido',
	['mt-should-range'] =       'dovrebbe essere un intervallo',
	['mt-cannot-with-e'] =      'non può essere usato se il primo parametro include "e"',
	['mt-not-range'] =          'non accetta un intervallo',
	['mt-cannot-e'] =           'non può usare la notazione e',
	['mt-too-many-parameter'] = 'troppi parametri',
	['mt-need-number'] =        'dopo l\'ultimo numero serve un parametro perchè è un intevallo.',
	['mt-ignore-parameter4'] =  'parametro 4 ignorato',
	['mt-val-not-supported'] =  'Parametro "%s=%s" non supportato',
	['mt-invalid-scale'] =      'L\'unità "%s" ha una scala "%s" non validata',
	['mt-both-u-ul'] =          'Il parametro (<b>u</b>) e (<b>ul</b>) sono entrambi specificati, solo uno è ammesso.',
	['mt-both-up-upl'] =        'Il parametro (<b>up</b>) e (<b>upl</b>) sono entrambi specificati, solo uno è ammesso..',
}

local data_module = 'Module:Val/units'
local convert_module = 'Module:Convert'

local function valerror(msg, nocat, iswarning)
	-- Return formatted message text for an error or warning.
	-- Can append "#FormattingError" to URL of a page with a problem to find it.
	local anchor = '<span id="FormattingError"></span>'
	local body, category
	if nocat or mw.title.getCurrentTitle():inNamespaces(1, 2, 3, 5) then
		-- No category in Talk, User, User_talk, or Wikipedia_talk.
		category = ''
	else
		category = '[[Category:Errori di compilazione del template M]]' --localizzazione
	end
	iswarning = false  -- problems are infrequent so try showing large error so editor will notice
	if iswarning then
		body = '<sup class="noprint Inline-Template" style="white-space:nowrap;">' ..
			'[[Template:M|<span title="' ..
			msg:gsub('"', '&quot;') ..
			'">warning</span>]]</sup>'
	else
		body = '<strong class="error">' ..
			'Errore in &#123;&#123;[[Template:M|M]]&#125;&#125;: ' ..
			msg ..
			'</strong>'
	end
	return anchor .. body .. category
end

-- localizzazioni
local range_types = {
	-- No need for '&nbsp;' because nowrap applies to all output.
	[","]   = ", ",
	["by"]  = " su ",
	["-"]   = "-",
	["–"]   = "-",
	["and"] = " e ",
	["or"]  = " o " ,
	["to"]  = " fino a " ,
	["x"]   = " × ",
	["×"]   = " × ",
	["/"]   = "/",
	---
	["~"] = "~",
	["÷"] = "÷",
	["a"] = " a ",
	["ai"] = " ai ",
	["su"]  = " su ",
	["e"] = " e ",
	["o"]  = " o " ,
	["fino"]  = " fino a " ,
	["xo"] = " × ",
	["−"] = "−",
	["+"] = "+",
	["e i"] = " e i "
}
local range_repeat_unit = {
	-- WP:UNIT wants unit repeated when a "multiply" range is used.
	--["x"]   = true,
	--["×"]   = true,
}

local function extract_item(index, numbers, arg)
	-- Extract an item from arg and store the result in numbers[index].
	-- If no argument or if argument is valid, return nil (no error);
	-- otherwise, return an error message.
	-- The stored result is:
	-- * a table for a number (empty if there was no specified number); or
	-- * a string for range text
	-- Input like 1e3 is regarded as invalid for all except argument 1
	-- which accepts e notation as an alternative to the 'e' argument.
	-- Input group separators are removed.
	local which = index
	local function fail(msg)
		local description
		if which == 'e' then
			description = mtext['mt-bad-exponent']
		else
			description = mtext['mt-parameter'] .. which
		end
		return description .. ' ' .. (msg or mtext['mt-not-number']) .. '.'
	end
	local result = {}
	local range = range_types[arg]
	if range then
		if type(index) == 'number' and (index % 2 == 0) then
			if index == 2 then
				if numbers[1] and numbers[1].exp then
					return fail(mtext['mt-cannot-range'])
				end
				numbers.has_ranges = true
			else
				if not numbers.has_ranges then
					return fail(mtext['mt-need-range'])
				end
			end
			numbers[index] = range
			if range_repeat_unit[arg] then
				-- Any "repeat" range forces unit (if any) to be repeated for all items.
				numbers.isrepeat = true
			end
			return nil
		end
		return fail(mtext['mt-not-range'])
	end
	if numbers.has_ranges and type(index) == 'number' and (index % 2 == 0) then
		return fail(mtext['mt-should-range'])
	end
	if index == 'e' then
		local e = numbers[1] and numbers[1].exp
		if e then
			if arg then
				return fail(mtext['mt-cannot-with-e'])
			end
			arg = e
			which = 1
		end
	end
	if arg and arg ~= '' then
		arg = arg:gsub(numsep, '')
		if numdot ~= '.' then
			arg = arg:gsub(numdot, '.')
		end
		if arg:sub(1, 1) == '(' and arg:sub(-1) == ')' then
			result.parens = true
			arg = arg:sub(2, -2)
		end
		local a, b = arg:match('^(.+)[Ee](.+)$')
		if a then
			if index == 1 then
				arg = a
				result.exp = b
			else
				return fail(mtext['mt-cannot-e'])
			end
		end
		local isnegative, propersign, prefix
		local minus = '−'
		prefix, arg = arg:match('^(.-)([%d.]+)$')
		local value = tonumber(arg)
		if not value then
			return fail()
		end
		if arg:sub(1, 1) == '.' then
			arg = '0' .. arg
		end
		if prefix == '' then
			-- Ignore.
		elseif prefix == '±' then
			-- Display for first number, ignore for others.
			if index == 1 then
				propersign = '±'
			end
		elseif prefix == '+' then
			propersign = '+'
		elseif prefix == '-' or prefix == minus then
			propersign = minus
			isnegative = true
		else
			return fail()
		end
		result.clean = arg
		result.sign = propersign or ''
		result.value = isnegative and -value or value
	end
	numbers[index] = result
	return nil  -- no error
end

local function get_args(numbers, args)
	-- Extract arguments and store the results in numbers.
	-- Return nothing (no error) if ok; otherwise, return an error message.
	for index = 1, 99 do
		local which = index
		local arg = args[which]  -- has been trimmed
		if not arg then
			which = 'e'
			arg = args[which]
		end
		local msg = extract_item(which, numbers, arg)
		if msg then
			return msg
		end
		if which == 'e' then
			break
		end
		if index > 19 then
			return mtext['mt-too-many-parameter']
		end
	end
	if numbers.has_ranges and (#numbers % 2 == 0) then
		return mtext['mt-need-number']
	end
end

local function get_scale(text, ucode)
	-- Return the value of text as a number, or throw an error.
	-- This supports extremely basic expressions of the form:
	--   a / b
	--   a ^ b
	-- where a and b are numbers or 'pi'.
	local n = tonumber(text)
	if n then
		return n
	end
	n = text:gsub('pi', math.pi)
	for _, op in ipairs({ '/', '^' }) do
		local a, b = n:match('^(.-)' .. op .. '(.*)$')
		if a then
			a = tonumber(a)
			b = tonumber(b)
			if a and b then
				if op == '/' then
					return a / b
				elseif op == '^' then
					return a ^ b
				end
			end
			break
		end
	end
	error(string.format(mtext['mt-invalid-scale'], ucode, text))
end

local function get_builtin_unit(ucode, definitions)
	-- Return table of information for the specified built-in unit, or nil if not known.
	-- Each defined unit code must be followed by two spaces (not tab characters).
	local _, pos = definitions:find('\n' .. ucode .. '  ', 1, true)
	if pos then
		local endline = definitions:find('%s*\n', pos)
		if endline then
			local result = {}
			local n = 0
			local text = definitions:sub(pos + 1, endline - 1):gsub('%s%s+', '\t')
			for item in (text .. '\t'):gmatch('(%S.-)\t') do
				if item == 'ALIAS' then
					result.alias = true
				elseif item == 'ANGLE' then
					result.isangle = true
					result.nospace = true
				elseif item == 'NOSPACE' then
					result.nospace = true
				elseif item == 'SI' then
					result.si = true
				else
					n = n + 1
					if n == 1 then
						local link, symbol = item:match('^%[%[([^|]+)|(.+)%]%]$')
						if link then
							result.symbol = symbol
							result.link = link
							n = 2
						else
							result.symbol = item
						end
					elseif n == 2 then
						result.link = item
					elseif n == 3 then
						result.scale_text = item
						result.scale = get_scale(item, ucode)
					else
						result.more_ignored = item
						break
					end
				end
			end
			if result.si then
				local s = result.symbol
				if ucode == 'mc' .. s or ucode == 'mu' .. s then
					result.ucode = 'µ' .. s  -- unit code for convert should be this
				end
			end
			if n >= 2 or (n >= 1 and result.alias) then
				return result
			end
			-- Ignore invalid definition, treating it as a comment.
		end
	end
end

local function convert_lookup(ucode, value, scaled_top, want_link, si, options)
	local lookup = require(convert_module)._unit
	return lookup(ucode, {
			value = value,
			scaled_top = scaled_top,
			link = want_link,
			si = si,
			sort = options.sortable,
		})
end

local function get_unit(ucode, value, scaled_top, options)
	local want_link = options.want_link
	if scaled_top then
		want_link = options.want_per_link
	end
	local data = mw.loadData(data_module)
	local result = options.want_longscale and
		get_builtin_unit(ucode, data.builtin_units_long_scale) or
		get_builtin_unit(ucode, data.builtin_units)
	local si, use_convert
	if result then
		if result.alias then
			ucode = result.symbol
			use_convert = true
		end
		if result.scale then
			-- Setting si means convert will use the unit as given, and the sort key
			-- will be calculated from the value without any extra scaling that may
			-- occur if convert found the unit code. For example, if val defines the
			-- unit 'year' with a scale and if si were not set, convert would also apply
			-- its own scale because convert knows that a year is 31,557,600 seconds.
			si = { result.symbol, result.link }
			value = value * result.scale
		end
		if result.si then
			ucode = result.ucode or ucode
			si = { result.symbol, result.link }
			use_convert = true
		end
	else
		result = {}
		use_convert = true
	end
	local convert_unit = convert_lookup(ucode, value, scaled_top, want_link, si, options)
	result.sortkey = convert_unit.sortspan
	if use_convert then
		result.text = convert_unit.text
		result.scaled_top = convert_unit.scaled_value
	else
		if want_link then
			result.text = '[[' .. result.link .. '|' .. result.symbol .. ']]'
		else
			result.text = result.symbol
		end
		result.scaled_top = value
	end
	return result
end

local function makeunit(value, options)
	-- Return table of information for the requested unit and options, or
	-- return nil if no unit.
	options = options or {}
	local unit
	local ucode = options.u
	local percode = options.per
	if ucode then
		unit = get_unit(ucode, value, nil, options)
	elseif percode then
		unit = { nospace = true, scaled_top = value }
	else
		return nil
	end
	local text = unit.text or ''
	local sortkey = unit.sortkey
	if percode then
		local function bracketed(code, text)
			return code:find('[*./]') and '(' .. text .. ')' or text
		end
		local perunit = get_unit(percode, 1, unit.scaled_top, options)
		text = (ucode and bracketed(ucode, text) or '') ..
				'/' .. bracketed(percode, perunit.text)
		sortkey = perunit.sortkey
	end
	if not (unit.nospace or options.nospace) then
		text = '&nbsp;' .. text
	end
	return { text = text, isangle = unit.isangle, sortkey = sortkey }
end

local function list_units(mode)
	-- Return wikitext to list the built-in units.
	-- A unit code should not contain wikimarkup so don't bother escaping.
	local data = mw.loadData(data_module)
	local definitions = data.builtin_units .. data.builtin_units_long_scale
	local last_was_blank = true
	local n = 0
	local result = {}
	local function add(line)
		if line == '' then
			last_was_blank = true
		else
			if last_was_blank and n > 0 then
				n = n + 1
				result[n] = ''
			end
			last_was_blank = false
			n = n + 1
			result[n] = line
		end
	end
	local si_prefixes = {
		-- These are the prefixes recognized by convert; u is accepted for micro.
		y = 'y',
		z = 'z',
		a = 'a',
		f = 'f',
		p = 'p',
		n = 'n',
		u = 'µ',
		['µ'] = 'µ',
		m = 'm',
		c = 'c',
		d = 'd',
		da = 'da',
		h = 'h',
		k = 'k',
		M = 'M',
		G = 'G',
		T = 'T',
		P = 'P',
		E = 'E',
		Z = 'Z',
		Y = 'Y',
	}
	local function is_valid(ucode, unit)
		if unit and not unit.more_ignored then
			assert(type(unit.symbol) == 'string' and unit.symbol ~= '')
			if unit.alias then
				if unit.link or unit.scale_text or unit.si then
					return false
				end
			end
			if unit.si then
				if unit.scale_text then
					return false
				end
				ucode = unit.ucode or ucode
				local base = unit.symbol
				if ucode == base then
					unit.display = base
					return true
				end
				local plen = #ucode - #base
				if plen > 0 then
					local prefix = si_prefixes[ucode:sub(1, plen)]
					if prefix and ucode:sub(plen + 1) == base then
						unit.display = prefix .. base
						return true
					end
				end
			else
				unit.display = unit.symbol
				return true
			end
		end
		return false
	end
	local lookup = require(convert_module)._unit
	local function show_convert(ucode, unit)
		-- If a built-in unit defines a scale or sets the SI flag, any unit defined in
		-- convert is not used (the scale or SI prefix's scale is used for a sort key).
		-- If there is no scale or SI flag, and the unit is not defined in convert,
		-- the sort key may not be correct; this allows such units to be identified.
		if not (unit.si or unit.scale_text) then
			if mode == 'convert' then
				unit.show = not lookup(unit.alias and unit.symbol or ucode).unknown
				unit.show_text = 'CONVERT'
			elseif mode == 'unknown' then
				unit.show = lookup(unit.alias and unit.symbol or ucode).unknown
				unit.show_text = 'UNKNOWN'
			elseif not unit.alias then
				-- Show convert's scale in square brackets ('[1]' for an unknown unit).
				-- Don't show scale for an alias because it's misleading for temperature
				-- and an alias is probably not useful for anything else.
				local scale = lookup(ucode, {value=1, sort='on'}).scaled_value
				if type(scale) == 'number' then
					scale = string.format('%.5g', scale):gsub('e%+?(%-?)0*(%d+)', 'e%1%2')
				else
					scale = '?'
				end
				unit.show = true
				unit.show_text = '[' .. scale .. ']'
			end
		end
	end
	for line in definitions:gmatch('([^\n]*)\n') do
		local pos, _ = line:find('  ', 1, true)
		if pos then
			local ucode = line:sub(1, pos - 1)
			local unit = get_builtin_unit(ucode, '\n' .. line .. '\n')
			if is_valid(ucode, unit) then
				show_convert(ucode, unit)
				local flags, text
				if unit.alias then
					text = unit.symbol
				else
					text = '[[' .. unit.link .. '|' .. unit.display .. ']]'
				end
				if unit.isangle then
					unit.nospace = nil  -- don't show redundant flag
				end
				for _, f in ipairs({
						{ 'alias', 'ALIAS' },
						{ 'isangle', 'ANGLE' },
						{ 'nospace', 'NOSPACE' },
						{ 'si', 'SI' },
						{ 'scale_text', unit.scale_text },
						{ 'show', unit.show_text },
					}) do
					if unit[f[1]] then
						local t = f[2]
						if t:match('^%u+$') then
							t = '<small>' .. t .. '</small>'
						end
						if flags then
							flags = flags .. ' ' .. t
						else
							flags = t
						end
					end
				end
				if flags then
					text = text .. ' • ' .. flags
				end
				add(ucode .. ' = ' .. text .. '<br />')
			else
				add(line .. ' ◆ <b>invalid definition</b><br />')
			end
		else
			add(line)
		end
	end
	return table.concat(result, '\n')
end

local delimit_groups = require('Module:Gapnum').groups
local function delimit(sign, numstr, fmt)
	-- Return sign and numstr (unsigned digits or numdot only) after formatting.
	-- Four-digit integers are not formatted with gaps.
	fmt = (fmt or 'gaps'):lower()
	if fmt == 'none' or (fmt == '' and #numstr == 4 and numstr:match('^%d+$')) then
		return sign .. numstr
	end
	-- Group number by integer and decimal parts.
	-- If there is no decimal part, delimit_groups returns only one table.
	local ipart, dpart = delimit_groups(numstr)
	local result
	if fmt == 'commas' then
		result = sign .. table.concat(ipart, numsep)
		if dpart then
			result = result .. numdot .. table.concat(dpart)
		end
	else
		-- Delimit with a small gap by default.
		local groups = {}
		groups[1] = table.remove(ipart, 1)
		for _, v in ipairs(ipart) do
			table.insert(groups, '<span style="margin-left:.25em;">' .. v .. '</span>')
		end
		-- Nota su en.wiki viene divisa anche la parte decimale del numero
		if dpart then
			table.insert(groups, numdot .. table.concat(dpart))
			--table.insert(groups, numdot .. (table.remove(dpart, 1) or ''))
			--for _, v in ipairs(dpart) do
			--	table.insert(groups, '<span style="margin-left:.25em;">' .. v .. '</span>')
			--end
		end
		result = sign .. table.concat(groups)
	end
	return result
end

local function sup_sub(sup, sub, align)
	-- Return the same result as Module:Su except val defaults to align=right.
	if align == 'l' or align == 'left' then
		align = 'left'
	elseif align == 'c' or align == 'center' then
		align = 'center'
	else
		align = 'right'
	end
	return '<span style="display:inline-block;margin-bottom:-0.3em;vertical-align:-0.4em;line-height:1.2em;font-size:85%;text-align:' ..
		align .. ';">' .. sup .. '<br />' .. sub .. '</span>'
end

local function range_text(items, unit_table, options)
	local fmt = options.fmt
	local nend = items.nend or ''
	if items.isrepeat or unit_table.isangle then
		nend = nend .. unit_table.text
	end
	local text = ''
	for i = 1, #items do
		if i % 2 == 0 then
			text = text .. items[i]
		else
			text = text .. delimit(items[i].sign, items[i].clean, fmt) .. nend
		end
	end
	return text
end

local function uncertainty_text(uncertainty, unit_table, options)
	local angle, text, need_parens
	if unit_table.isangle then
		angle = unit_table.text
	end
	local upper = uncertainty.upper or {}
	local lower = uncertainty.lower or {}
	local uncU = upper.clean
	if uncU then
		local fmt = options.fmt
		local uncL = lower.clean
		if uncL then
			uncU = delimit('+', uncU, fmt) .. (upper.errend or '')
			uncL = delimit('−', uncL, fmt) .. (lower.errend or '')
			if angle then
				uncU = uncU .. angle
				uncL = uncL .. angle
			end
			text = (angle or '') ..
				'<span style="margin-left:0.3em;">' ..
				sup_sub(uncU, uncL, options.align) ..
				'</span>'
		else
			if upper.parens then
				text = '(' .. uncU .. ')'  -- old template did not delimit
			else
				text = (angle or '') ..
					'<span style="margin-left:0.3em;margin-right:0.15em;">±</span>' ..
					delimit('', uncU, fmt)
				need_parens = true
			end
			if uncertainty.errend then
				text = text .. uncertainty.errend
			end
			if angle then
				text = text .. angle
			end
		end
	else
		if angle then
			text = angle
		end
	end
	return text, need_parens
end

local function _main(values, unit_spec, options)
	if options.sandbox then
		data_module = data_module .. '/sandbox'
		convert_module = convert_module .. '/sandbox'
	end
	local action = options.action
	if action then
		if action == 'list' then
			-- Kludge: am using the align parameter (a=xxx) for type of list.
			return list_units(options.align)
		end
		return valerror('invalid action "' .. action .. '".', options.nocat)
	end
	local number = values.number or (values.numbers and values.numbers[1]) or {}
	local e_10 = options.e or {}
	local novalue = (number.value == nil and e_10.clean == nil)
	local fmt = options.fmt
	local want_sort = true
	local sortable = options.sortable
	if sortable == 'off' or (sortable == nil and novalue) then
		want_sort = false
	elseif sortable == 'debug' then
		-- Same as sortable = 'on' but the sort key is displayed.
	else
		sortable = 'on'
	end
	local sort_value = 1
	if want_sort then
		sort_value = number.value or 1
		if e_10.value and sort_value ~= 0 then
			-- The 'if' avoids {{val|0|e=1234}} giving an invalid sort_value due to overflow.
			sort_value = sort_value * 10^e_10.value
		end
	end
	local unit_table = makeunit(sort_value, {
						u = unit_spec.u,
						want_link = unit_spec.want_link,
						per = unit_spec.per,
						want_per_link = unit_spec.want_per_link,
						nospace = novalue,
						want_longscale = unit_spec.want_longscale,
						sortable = sortable,
					})
	local sortkey
	if unit_table then
		if want_sort then
			sortkey = unit_table.sortkey
		end
	else
		unit_table = { text = '' }
		if want_sort then
			sortkey = convert_lookup('dummy', sort_value, nil, nil, nil, { sortable = sortable }).sortspan
		end
	end
	local final_unit = unit_table.isangle and '' or unit_table.text
	local e_text, n_text, need_parens
	local uncertainty = values.uncertainty
	if uncertainty then
		if number.clean then
			n_text = delimit(number.sign, number.clean, fmt) .. (number.nend or '')
			local text
			text, need_parens = uncertainty_text(uncertainty, unit_table, options)
			if text then
				n_text = n_text .. text
			end
		else
			n_text = ''
		end
	else
		if values.numbers.isrepeat then
			final_unit = ''
		end
		n_text = range_text(values.numbers, unit_table, options)
		need_parens = true
	end
	if e_10.clean then
		if need_parens then
			n_text = '(' .. n_text .. ')'
		end
		e_text = '10<sup>' .. delimit(e_10.sign, e_10.clean, fmt) .. '</sup>'
		if number.clean then
			e_text = '<span style="margin-left:0.25em;margin-right:0.15em;">×</span>' .. e_text
		end
	else
		e_text = ''
	end
	local result =
		(sortkey or '') ..
		(options.prefix or '') ..
		n_text ..
		e_text ..
		final_unit ..
		(options.suffix or '')
	if result ~= '' then
		result = '<span class="nowrap">' .. result .. '</span>'
	end
	return result .. (options.warning or '')
end

local function check_parameters(args, has_ranges, nocat)
	-- Return warning text for the first problem parameter found, or nothing if ok.
	local whitelist = {
		a = true,
		action = true,
		debug = true,
		e = true,
		['end'] = true,
		errend = true,
		['+errend'] = true,
		['-errend'] = true,
		fmt = true,
		['long scale'] = true,
		long_scale = true,
		longscale = true,
		nocategory = true,
		p = true,
		s = true,
		sortable = true,
		u = true,
		ul = true,
		up = true,
		upl = true,
	}
	for k, v in pairs(args) do
		if type(k) == 'string' and not whitelist[k] then
			local warning = string.format(mtext['mt-val-not-supported'], k, v)
			return valerror(warning, nocat, true)
		end
	end
	if not has_ranges and args[4] then
		return valerror(mtext['mt-ignore-parameter4'], nocat, true)
	end
end

local function main(frame)
	local getArgs = require('Module:Arguments').getArgs
	local args = getArgs(frame, {wrappers = { 'Template:Val', 'Template:M', 'Template:MNL' }})
	local nocat = args.nocategory
	local numbers = {}  -- table of number tables, perhaps with range text
	local msg = get_args(numbers, args)
	if msg then
		return valerror(msg, nocat)
	end
	if args.u and args.ul then
		return valerror(mtext['mt-both-u-ul'], nocat)
	end
	if args.up and args.upl then
		return valerror(mtext['mt-both-up-upl'], nocat)
	end
	local values
	if numbers.has_ranges then
		-- Multiple values with range separators but no uncertainty.
		numbers.nend = args['end']
		values = {
			numbers = numbers,
		}
	else
		-- A single value with optional uncertainty.
		local function setfield(i, dst, src)
			local v = args[src]
			if v then
				if numbers[i] then
					numbers[i][dst] = v
				else
					numbers[i] = { [dst] = v }
				end
			end
		end
		setfield(1, 'nend', 'end')
		setfield(2, 'errend', '+errend')
		setfield(3, 'errend', '-errend')
		values = {
			number = numbers[1],
			uncertainty = {
				upper = numbers[2],
				lower = numbers[3],
				errend = args.errend,
			}
		}
	end
	local unit_spec = {
			u = args.ul or args.u,
			want_link = args.ul ~= nil,
			per = args.upl or args.up,
			want_per_link = args.upl ~= nil,
			want_longscale = (args.longscale or args.long_scale or args['long scale']) == 'on',
		}
	local options = {
			action = args.action,
			align = args.a,
			e = numbers.e,
			fmt = args.fmt,
			nocat = nocat,
			prefix = args.p,
			sandbox = string.find(frame:getTitle(), 'sandbox', 1, true) ~= nil,
			sortable = args.sortable or (args.debug == 'yes' and 'debug' or nil),
			suffix = args.s,
			warning = check_parameters(args, numbers.has_ranges, nocat),
		}
	return _main(values, unit_spec, options)
end

return { main = main, _main = _main }