Spreader patch
A spreader patch is a fabric reinforcement at a point on a sail where it is likely to rub with the spreader on a mast.
A spreader patch is a fabric reinforcement at a point on a sail where it is likely to rub with the spreader on a mast.
Use and construction
[edit]Spreader patches may be placed on a jib,[1] when it overlaps with the mast, or on the mainsail,[2] where it may interfere when furled, or when the sail is backwinded against the mast.[3] Patches may be made of tape, sticky-backed Dacron, or other material that is compatible with the type of sailcloth being reinforced.[4] When applying such patches, it's important to affix it starting from the inner part of the sail, towards the edge of the sail (leech).[5]
References
[edit]- ^ Rousmaniere, John (2014-01-07). The Annapolis Book of Seamanship: Fourth Edition. Simon and Schuster. p. 111. ISBN 9781451650242.
- ^ Neal, Tom (January 1995). There's the rub. Newport, Rhode Island. p. 25.
{{cite book}}:|work=ignored (help)CS1 maint: location missing publisher (link) - ^ Textor, Ken (1995). The New Book of Sail Trim. Sheridan House, Inc. p. 185. ISBN 9780924486814.
- ^ Leonard, Beth A. (September 2007). Sew it yourself. Newport, Rhode Island. p. 140.
{{cite book}}:|work=ignored (help)CS1 maint: location missing publisher (link) - ^ Jasper, Aaron (December 1992). Sail repair and jury-rigging at sea. Newport, Rhode Island. p. 75.
{{cite book}}:|work=ignored (help)CS1 maint: location missing publisher (link)