Real-time Java
Real-time Java is a catch-all term for a combination of technologies that enables programmers to write programs that meet the demands of real-time systems in the Java programming language. Java's sophisticated memory management, native support for threading and concurrency, type safety, and relative simplicity have created a demand for its use in many domains. Its capabilities have been enhanced to support real-time computational needs: Real-time Java supports a strict priority-based threading model, because Java threads support priorities, Java locking mechanisms support priority inversion avoidance techniques, such as priority inheritance or the priority ceiling protocol, and event handling. The initial proposal for an open standard for real-time Java was put forth by Kelvin Nilsen, then serving as a research faculty member at Iowa State University. A follow-on overview paper was published in the Communications of the ACM. The overwhelmingly positive response to these early proposals resulted in a series of meetings hosted by the National Institute of Standards and Technology in an effort to establish an open standard for real-time Java. NIST was ultimately told that they were not the appropriate body to establish standards related to the Java language, as Java was trademarked, and the technologies were owned by Sun Microsystems. Therefore, NIST ended their efforts with publication of consensus requirements. that could be considered by future standardization efforts to be hosted by Sun Microsystems. When the Java Community was formed, the very first effort was the specification for real-time Java, JSR001. A number of implementations of the resulting Real-time specification for Java (RTSJ) have emerged, including a reference implementation from Timesys, IBM's WebSphere Real Time, Sun Microsystems's Java SE Real-Time Systems, PTC Perc from PTC, Inc., or JamaicaVM from aicas. The RTSJ addressed the critical issues by mandating a minimum specification for the threading model (and allowing other models to be plugged into the VM) and by providing for areas of memory that are not subject to garbage collection, along with threads that are not preemptable by the garbage collector. These areas are instead managed using region-based memory management. The latest specification, 2.0, supports direct device access and deterministic garbage collection as well.
 | This article includes a list of general references, but it lacks sufficient corresponding inline citations. (June 2017) |
 |
Real-time Java is a catch-all term for a combination of technologies that enables programmers to write programs that meet the demands of real-time systems in the Java programming language.
Java's sophisticated memory management, native support for threading and concurrency, type safety, and relative simplicity have created a demand for its use in many domains. Its capabilities have been enhanced to support real-time computational needs:
- Real-time Java supports a strict priority-based threading model,
- because Java threads support priorities, Java locking mechanisms support priority inversion avoidance techniques, such as priority inheritance or the priority ceiling protocol, and
- event handling.
The initial proposal[1] for an open standard for real-time Java was put forth by Kelvin Nilsen, then serving as a research faculty member at Iowa State University. A follow-on overview paper was published in the Communications of the ACM.[2] The overwhelmingly positive response to these early proposals resulted in a series of meetings hosted by the National Institute of Standards and Technology in an effort to establish an open standard for real-time Java. NIST was ultimately told that they were not the appropriate body to establish standards related to the Java language, as Java was trademarked, and the technologies were owned by Sun Microsystems. Therefore, NIST ended their efforts with publication of consensus requirements.[3] that could be considered by future standardization efforts to be hosted by Sun Microsystems.
When the Java Community was formed, the very first effort was the specification for real-time Java, JSR001. A number of implementations of the resulting Real-time specification for Java (RTSJ) have emerged, including a reference implementation from Timesys, IBM's WebSphere Real Time, Sun Microsystems's Java SE Real-Time Systems,[4] PTC Perc from PTC, Inc.,[5] or JamaicaVM from aicas.
The RTSJ addressed the critical issues by mandating a minimum specification for the threading model (and allowing other models to be plugged into the VM) and by providing for areas of memory that are not subject to garbage collection, along with threads that are not preemptable by the garbage collector. These areas are instead managed using region-based memory management. The latest specification, 2.0, supports direct device access and deterministic garbage collection as well.
Real-Time Specification for Java
[edit]The Real-Time Specification for Java (RTSJ) is a set of interfaces and behavioral refinements that enable real-time computer programming in the Java programming language. RTSJ 1.0 was developed as JSR 1 under the Java Community Process, which approved the new standard in November, 2001. RTSJ 2.0 is being developed under JSR 282. A draft version is available at a JCP page.[6] More information can be found from Aicas.[7]
See also
[edit]- Javolution – RTSJ Compliant Java Library
References
[edit]- ^ "Issues in the Design and Implementation of Real-Time Java" (PDF). Archived from the original (PDF) on 2017-08-09.
- ^ Nilsen, Kelvin (1998). "Adding real-time capabilities to Java". Communications of the ACM. 41 (6): 49–56. doi:10.1145/276609.276619.
- ^ "Information Technology Laboratory" (PDF). NIST. 28 April 2015.
- ^ "Sun Java Real-Time System". java.sun.com.
- ^ "Real-Time Java with PTC Perc | PTC".
- ^ https://www.jcp.org/en/jsr/detail?id=282 JSR 282
- ^ "Real-Time Specification for Java | aicas.com". Archived from the original on 2015-05-26. Retrieved 2025-02-17.
External links
[edit]- Issues in the Design and Implementation of Real-Time Java
- Adding Real-Time Capabilities to Java
- Requirements for Real-Time Extensions for the Java Platform
- Real-Time Specification for Java 2.0 (RTSJ 2.0)
- JSR-282
- Real-Time Specification for Java (RTSJ)
- JSR-1
- IBM WebSphere Real Time a fully conformant RTSJ SE VM
- JamaicaVM Archived 2012-02-29 at the Wayback Machine an RTSJ SE implementation with deterministic garbage collection
- PTC Perc a real-time VM based on Java Standard Edition but with a patented deterministic garbage collection technology rather than RTSJ
- Sun Java SE Real-Time System
- Apogee real-time Java with real-time GC (discontinued)
- Timesys RTSJ implementation and testing toolkit
- jRate (Java Real-Time Extension) an open-source extension of the GNU GCJ compiler front-end and runtime system which adds support for most of the features required by the RTSJ.
- International Workshop on Java Technologies for Realtime and Embedded Systems (JTRES 2005) Archived 2013-08-31 at the Wayback Machine JTRES 2006 JTRES 2007 Archived 2012-02-06 at the Wayback Machine JTRES 2008 Archived 2008-06-28 at the Wayback Machine JTRES 2009 Archived 2015-07-14 at the Wayback Machine JTRES 2010 JTRES 2011 JTRES 2012 Archived 2013-10-07 at the Wayback Machine JTRES 2013 Archived 2013-10-07 at the Wayback Machine JTRES 2014 JTRES 2015
- LJRT Lund Java based Real-Time open source
- Ovm
- Fiji VM real-time Java
- Real-time Java VMs