Quicksand
Quicksand, also known as sinking sand, is a colloid consisting of fine granular material (such as sand, silt or clay) and water. It forms in saturated loose sand when the sand is suddenly agitated. When water in the sand cannot escape, it creates a liquefied soil that loses strength and cannot support weight. Quicksand can form in standing water or in upward flowing water (as from an artesian spring). In the case of upward-flowing water, forces oppose the force of gravity and suspend the soil particle. The cushioning of water gives quicksand, and other liquefied sediments, a spongy, fluid-like texture. In accordance with Archimedes' principle, objects in liquefied sand sink to the level at which the weight of the object is equal to the weight of the displaced soil/water mix and the submerged object floats due to its buoyancy. Soil liquefaction may occur in partially saturated soil when it is shaken by an earthquake or similar forces. The movement combined with an increase in pore pressure (of groundwater) leads to the loss of particle cohesion, causing buildings or other objects on that surface to sink.
 | This article needs additional citations for verification. (April 2022) |
.jpg)
Quicksand, also known as sinking sand, is a colloid consisting of fine granular material (such as sand, silt or clay) and water. It forms in saturated loose sand when the sand is suddenly agitated. When water in the sand cannot escape, it creates a liquefied soil that loses strength and cannot support weight. Quicksand can form in standing water or in upward flowing water (as from an artesian spring). In the case of upward-flowing water, forces oppose the force of gravity and suspend the soil particle.
The cushioning of water gives quicksand, and other liquefied sediments, a spongy, fluid-like texture. In accordance with Archimedes' principle, objects in liquefied sand sink to the level at which the weight of the object is equal to the weight of the displaced soil/water mix and the submerged object floats due to its buoyancy.
Soil liquefaction may occur in partially saturated soil when it is shaken by an earthquake or similar forces. The movement combined with an increase in pore pressure (of groundwater) leads to the loss of particle cohesion, causing buildings or other objects on that surface to sink.
Properties
[edit].jpg)
Quicksand is a shear thinning non-Newtonian fluid: when undisturbed, it often appears to be solid ("gel" form), but a less than 1% change in the stress on the quicksand will cause a sudden decrease in its viscosity ("sol" form). After an initial disturbance—such as a person attempting to walk on it—the water and sand in the quicksand separate and dense regions of sand sediment form; it is because of the formation of these high volume fraction regions that the viscosity of the quicksand seems to decrease suddenly. Someone stepping on it will start to sink. To move within the quicksand, a person or object must apply sufficient pressure on the compacted sand to re-introduce enough water to liquefy it. The forces required to do this are quite large: to remove a foot from quicksand at a speed of 1 cm/s would require the same amount of force as that needed to lift a car.[1]
It is impossible for a human to sink entirely into quicksand,[2] due to the higher density of the fluid. Quicksand has a density of about 2 grams per cubic centimeter, whereas the density of the human body is only about 1 gram per cubic centimeter. At that level of density, sinking beyond about waist height in quicksand is impossible. Even objects with a higher density than quicksand will float on it if stationary. Aluminium, for example, has a density of about 2.7 grams per cubic centimeter, but a piece of aluminium will float on top of quicksand until motion causes the sand to liquefy.[3]
Continued or panicked movement, however, may cause a person to sink further in the quicksand.[4] Since this increasingly impairs movement, it can lead to a situation where other factors such as exposure (i.e., sun stroke, dehydration and hypothermia), drowning in a rising tide or attacks by predatory or otherwise aggressive animals may harm a trapped person should they not be rescued.[5]
Quicksand may be escaped by slow movement of the legs in order to increase viscosity of the fluid, and rotation of the body so as to float in the supine position (lying horizontally with the face and torso facing up).[3]
In popular culture
[edit]Quicksand is a trope of adventure fiction, particularly in film, where it is typically and unrealistically depicted with a suction effect that causes anyone or anything that walks into it to sink until fully submerged and risk drowning. This has led to the common misconception that humans can be completely immersed and drown in quicksand, which is impossible.[6] According to a 2010 article by Slate, this gimmick had its heyday in the 1960s, when almost 3% of all films showed characters sinking in clay, mud, or sand.[7]
See also
[edit]References
[edit]- ^ Khaldoun, A., E. Eiser, G. H. Wegdam, and Daniel Bonn. 2005. "Rheology: Liquefaction of quicksand under stress." Nature 437 (29 Sept.): 635. doi:10.1038/437635a
- ^ "Will Quicksand Really Kill You?". The Science Explorer. Retrieved 2020-04-08.
- ^ a b Bakalar, Nicholas (September 28, 2005). "Quicksand Science: Why It Traps, How to Escape". National Geographic News. Archived from the original on February 21, 2021. Retrieved October 9, 2011.
- ^ Gleeson, Bill (24 August 2016). "Sinking sand is notorious near Crosby - here's what you need to know". Liverpool Echo.
- ^ Discovery Channel. MythBusters. Season 2. "Killer Quicksand." October 20, 2004.
- ^ Reaney, Patricia (29 September 2005). "Quicksand myth exposed". www.abc.net.au. Reuters. Retrieved 2020-04-08.
- ^ Engber, Daniel (23 August 2010). "Terra Infirma: The rise and fall of quicksand". Slate. Retrieved 23 August 2010.
External links
[edit]
- How quicksand works at HowStuffWorks
- "What Is Quicksand?". Scientific American.
- Video showing quicksand in a sandpit at YouTube
| International | |
|---|---|
| Other | |
