PKP class EP05

This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations. Please help improve this article by introducing more precise citations. (December 2014) (Learn how and when to remove this message)

PKP class EP05
EP05-16 at Warszawa Ochota station, 2007.
Type and origin Power type Electric Rebuilder PKP (Rebuilt from PKP class EU05) Rebuild date 1973-1977 Number rebuilt 27
Specifications Configuration: ​  • UIC Bo′Bo′ Gauge 1,435 mm (4 ft 8+1⁄2 in) standard gauge Wheel diameter 1,250 mm (49.21 in) Length 16,140 mm (52 ft 11 in) Width 2,950 mm (9 ft 8 in) Height 3,987 mm (13 ft 1 in) Axle load 20.6 tonnes (20.3 long tons; 22.7 short tons) Loco weight 82.5 tonnes (81.2 long tons; 90.9 short tons) Electric system/s 3,000 V DC Catenary Current pickup Pantograph Traction motors 3AL4846ZT, 77:44 gear ratio Loco brake Oerlikon
Performance figures Maximum speed 160 km/h (99 mph) Power output 2,032 kW (2,720 hp)
Career Operators PKP Nicknames Piątka, Czesio

The EP05 (also manufactured as ZNTKiM Gdańsk 44E) is a Polish modification of Czech electric locomotive EU05 used by Polish railway operator (PKP).

The locomotive was produced in the years 1957–1960 in three types: 20E1, the prototype, 30E1 and 30E2. In need of modern electric locomotives for passenger trains, and unable to get timely delivery of EU06 locomotives from England, Poland bought 30 locomotives from its southern neighbours.

In 1969, PKP started testing several changes to enable EU05 locomotives to achieve speeds up to 160 km/h (99 mph). First trials were made with the EU05-29 locomotive, and soon it became clear that it was possible to safely achieve speeds up to 170 km/h (106 mph) after changing the transmission rate. The decision was made to rebuild all locomotives of EU05 class during first servicing. As a result, by 1977 almost all locomotives had been rebuilt to EP05 class, except for locomotives 09, 12 and 19, which had been scrapped earlier. To distinguish the new series from its predecessor, the color scheme was changed from two-tone green to orange. All modifications were conducted in Zakłady Naprawcze Taboru Kolejowego in Gdańsk.

In the beginning of the 1980s, EP05 was being prepared for pulling express trains. Most of the engines had had multiple steering and pneumatic devices installed, which allowed them to pull trains with two connected locomotives and operate automatic fixtures. First express train, Górnik (En.: miner) led by EP05 locomotive run in 1984 on Centralna Magistrala Kolejowa, achieving a top speed of 138.2 km/h (86 mph). In the second half of the 1980s the top speed on Centralna Magistrala Kolejowa rose to 160 km/h (99 mph) and as a result EP05 could run at top speed. Some of those engines later had their clutch changed from Secheron to Skoda.

Following the introduction of EP09 locomotives, EP05 started to be withdrawn from service, but due to several break downs of EP09 it was postponed. Today only one unit (EP05-23) of this locomotive still run under PKP Cargo, pulling InterCity trains. There is also one unit of EU05 left in service, which is in fact EP05-22 engine repainted in 2003. It serves as an exhibit in Kraków. As of 2018, it has been restored and re-entered regular service, at speeds of 160 km/h. EP05-23 Re-entered regular Service As an Active Exhibit In 2017. Repainted Back To The Orange Livery in the same year, EP05-23 unit is owned by PKP Intercity

EP05 series locomotive is a passenger electric locomotive able to pull passenger trains. It has steering cabins on either end of the box. On a straight, horizontal track it could pull 600 t. passenger trains with a top speed of 160 km/h.

• Piątka (eng. The Five) - from locos number
• Czesio (eng. The Czech) - from name of country where was produced (Czech Republic)

• EU05
• ChS3