Loop (statement)

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Loop" statement – news · newspapers · books · scholar · JSTOR (January 2026) (Learn how and when to remove this message)

In computer programming, a loop is a control flow statement that allows code to be executed repeatedly, usually with minor alterations between repetitions. Loops can be used to perform a repeated action on all items in a collection, or to implement a long lived program.

Loops are a feature of high-level programming languages. In low-level programming languages the same functionality is achieved using jumps. When a program is compiled to machine code, looping may be achieved using jumps; but some loops can be optimized to run without jumping.^[1]

Usually, loops are expected to run for a finite number of iteration.^{[citation needed]} Without proper care, loops may accidentally be created that have no possibility of terminating. Such loops are called infinite loops. The problem of determining whether a program contains an infinite loop is known as the halting problem.

A conditional loop (also known as an indeterminate loop^[2]) is a loop that determines whether to terminate based on a logical condition.^[3] These loops are flexible, but their exact behavior can be difficult to reason about.^[4]: 368

A conditional loop is usually composed of two parts: a condition and a body. The condition is a logical statement depending on the state of the program and the body is a block of code that runs as long as the condition holds.^[3]

A common misconception is that the execution of the body terminates as soon as the condition does not hold anymore; but this is usually not the case.^[4]: 368 In most programming languages, the condition is checked once for every execution of the body. When the condition is checked is not standardized and some programming languages contain multiple conditional looping structures with different rules about when the condition is assessed.^{[citation needed]}

A pre-test loop is a conditional loop where the condition is checked before the body is executed. More precisely, the condition is checked and if it holds the body is execute. Afterwards, the condition is checked again, and if it holds the body is executed again. This process repeats until the condition does not hold. Many programming languages call this loop a while loop and refer to it with the keyword while. They are commonly formatted in manner similar to

while condition do
    body
repeat

Instead of the keywords do and repeat, other methods are sometimes used to indicate where the body begins and ends, such as curly braces^[5] or whitespace.^[6]

For example, the following code fragment first checks whether x is less than five, which it is, so the body is entered. There, x is displayed and then incremented by one. After executing the statements in the body, the condition is checked again, and the loop is executed again. This process repeats until x has the value five.

x ← 0
while x < 5 do
    display(x)
    x ← x + 1
repeat

A post-test loop is a conditional loop where the condition is checked after the body is executed. More precisely, the body is executed and afterwards the condition is checked. If it holds the body is run again and then the condition is checked. This is repeated until the condition does not hold. This is sometimes called a do-while loop due to the syntax used in various programming languages,^[7] although this can be confusing since Fortran and PL/I use the syntax "DO WHILE" for pre-test loops.^[8][9] Post-test loops are commonly formatted in manner similar to

do
    body
repeat while condition 

Instead of the keywords do and repeat others methods are sometime use to indicate where the body begins and ends, such as curly braces.^[10]

Some languages may use a different naming convention for this type of loop. For example, the Pascal and Lua languages have a "repeat until" loop, which continues to run until the control expression is true and then terminates.^[11][12]

A three-part for loop, popularized by C, has two additional parts: initialization (loop variant), and increment, both of which are blocks of code. The initialization is intended as code that prepares the loop and is run once in the beginning and increment is used to update the state of the program after each iteration of the loop. Otherwise, the three-part for loop is a pre-test loop. They are commonly formatted in manner similar to

for initialization, condition, increment do
    body
repeat

This syntax came from B and was originally invented by Stephen C. Johnson.^[13] The following C code is an example of a three part loop that prints the numbers from 0 to 4.

for (int i = 0; i < 5; i++) {
    printf("%d\n", i);
}

This section needs expansion. You can help by adding missing information. (January 2026)

Assuming there is a function called do_work() that does some work, the following are equivalent.^{[citation needed]}

do
    do_work()
repeat while condition 

do_work()
while condition do
    do_work()
repeat

As long as the continue statement is not used, the above is technically equivalent to the following (though these examples are not typical or modern style used in everyday computers):

while true do
    do_work()
    if condition is not true then
        break
    end if
repeat

or

LOOPSTART:
do_work()
if condition then
    goto LOOPSTART
end if

An enumeration (also known as an determinate loop^[2]) is a loop intended to iterate over all the items of a collection.^{[14][page needed]} It is not as flexible as a conditional loop; but it is more predictable.^{[citation needed]} For example, it is easier to guarantee that enumerations terminate and they avoid potential off-by-one errors.^{[citation needed]} Enumerations can be implemented using an iterator, whether implicitly or explicitly.^{[citation needed]}

Depending on the programming language, various keywords are used to invoke enumerations. For example, descendants of ALGOL use for,^[15] while descendants of Fortran use do^[16] and COBOL uses PERFORM VARYING.^[17]

Enumerations are sometimes called "for loops," for example in Zig and Rust.^[18][19] This can be confusing since many of the most popular^[20] programming languages, such as C, C++, and Java, use that term for the three-part for loop,^[21][22][23] which is not an enumeration. Other programming languages, such as Perl and C#, avoid this confusion by using the term "foreach loop."^[24][25]

The order in which the items in the collection are iterated through depends on the programming language. Fortran 95 has a loop, invoked using the keyword FORALL, that is independent of this order. It has the effect of executing each iteration of the loop at the same time. This feature was made obsolescent in Fortran 2018.^[26]

This section needs expansion. You can help by adding missing information. (January 2026)

In most functional programming languages, recursion is used instead of traditional loops. This is due to the fact that variables are immutable, and therefore the increment step of a loop cannot occur.^[27]

To avoid running into stack overflow errors for long loops, functional programming languages implement tail call optimisation, which allows the same stack frame to be used for each iteration of the loop, compiling to effectively the same code as a while or for loop.^[28]

Some languages, such as Haskell, have a syntax known as a list comprehension, which is similar to enumeration, iterating over the contents of a list and transforming it into a new list.^{[citation needed]}

A loop counter is a control variable that controls the iterations of a loop. Loop counters change with each iteration of a loop, providing a unique value for each iteration. The loop counter is used to decide when the loop should terminate. It is so named because most uses of this construct result in the variable taking on a range of integer values.

A common identifier naming convention is for the loop counter to use the variable names i, j, and k (and so on if needed),^[29] where i would be the most outer loop, j the next inner loop, etc. This style is generally agreed to have originated from the early programming of Fortran^{[citation needed]}, where these variable names beginning with these letters were implicitly declared as having an integer type, and so were obvious choices for loop counters that were only temporarily required. The practice dates back further to mathematical notation where indices for sums and multiplications are often i, j, and k.

Using terse names for loop counters, like i and j, is discouraged by some since the purpose of the variables is not as clear as if they were given a longer more descriptive name.^{[4]: 383–382}

Different languages specify different rules for what value the loop counter will hold on termination of its loop, and indeed some hold that it becomes undefined. This permits a compiler to generate code that leaves any value in the loop counter, or perhaps even leaves it unchanged because the loop value was held in a register and never stored in memory. Actual behavior may even vary according to the compiler's optimization settings.

Modifying the loop counter within the body of the loop can lead to unexpected consequences. To prevent such problems, some languages make the loop counter immutable.^{[citation needed]} However, only overt changes are likely to be detected by the compiler. Situations where the address of the loop counter is passed as an argument to a subroutine, make it very difficult to check because the routine's behavior is in general unknowable to the compiler unless the language supports procedure signatures and argument intents.^{[citation needed]}

Some languages may also provide supporting statements for altering how a loop's iteration proceeds. Common among these are the break statement, which terminates the current loop the program is in, and the continue statement, which skips to the next iteration of the current loop.^[4]: 379 These statements may have other names; For example in Fortran 90, they are called exit and cycle.^{[citation needed]}

A loop can also be terminated by returning from the function within which it is being executed.

In the case of nested loops, the break and continue statements apply to the inner most loop. Some languages allow loops to be labelled. These statements can then be applied to any of the loops in which the program is nested.

outer_loop: (This is a label for the outermost loop)
for 1 ≤ i ≤ 2 do
    for 1 ≤ j ≤ 2 do
        display(i, j)
        if i = 2
            continue outer_loop
        end if
    repeat
repeat
(This nested loop displays the pairs (1, 1), (1, 2), and (2, 1))

This section needs expansion. You can help by adding missing information. (January 2026)

An infinite loop is a loop which never terminates. This can be intentional, or the result of a logic error.^{[citation needed]}

Systematically detecting infinite loops is known as the halting problem.^[30]

Infinite loops are useful in applications which need to perform a repeated calculation until a program terminates, such as web servers.^[31]

• Primitive recursive function
• General recursive function
• Repeat loop (disambiguation)
• LOOP (programming language) – a programming language with the property that the functions it can compute are exactly the primitive recursive functions