Jet nut
A jet nut, also known as a k-nut, is a special type of hex locknut that is commonly used in the aerospace and automotive racing industries. It has a flange on one end of the nut, the hex is smaller than a standard sized hex nut, and it is shorter than a standard hex nut. It achieves its locking action by using an elliptical offset on the un-flanged end of the nut.
A jet nut,[1] also known as a k-nut,[1][2][3] is a special type of hex locknut that is commonly used in the aerospace and automotive racing industries.[3]
It has a flange on one end of the nut, the hex is smaller than a standard sized hex nut, and it is shorter than a standard hex nut. It achieves its locking action by using an elliptical offset on the un-flanged end of the nut.[4]
References
[edit]Notes
[edit]- ^ a b K-NUTS.com, retrieved 2 January 2012.
- ^ Racing hardware & fasteners (PDF), retrieved 3 December 2008[permanent dead link].
- ^ a b Smith, pp. 106–107.
- ^ Fasteners, retrieved 3 December 2008.
Bibliography
[edit]- Smith, Carroll (21 June 1990), Carroll Smith's Nuts, Bolts, Fasteners, and Plumbing Handbook, MotorBooks/MBI Publishing Company, ISBN 0-87938-406-9.
 | This article about a mechanical engineering topic is a stub. You can help Wikipedia by adding missing information. |