Filter cake

A filter cake is formed by the substances that are retained on a filter. Filter aids, such as diatomaceous earth or activated carbon are usually used to form the filter cake. The purpose is to increase flow rate or achieve a smaller micron filtration. The filter cake grows in the course of filtration, becoming "thicker" as particulate matter and filter aid is retained on the filter. With increasing layer thickness, the flow resistance of the filter cake increases. After a time, the filter cake has to be removed from the filter, e.g. by backflushing. If this is not accomplished, the filtration is disrupted because the resistance of the filter cake gets too high; hence, too little of the mixture to be filtered can pass through the filter cake, and the filter becomes plugged or clogged. The specifications of the filter cake dictate the filtration method of choice.

The topic of this article may not meet Wikipedia's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted. Find sources: "Filter cake" – news · newspapers · books · scholar · JSTOR (May 2025) (Learn how and when to remove this message)

This article may be confusing or unclear to readers. Please help clarify the article. There might be a discussion about this on the talk page. (May 2025) (Learn how and when to remove this message)

A filter cake is formed by the substances that are retained on a filter. Filter aids, such as diatomaceous earth or activated carbon are usually used to form the filter cake. The purpose is to increase flow rate or achieve a smaller micron filtration. The filter cake grows in the course of filtration, becoming "thicker" as particulate matter and filter aid is retained on the filter.

With increasing layer thickness, the flow resistance of the filter cake increases. After a time, the filter cake has to be removed from the filter, e.g. by backflushing. If this is not accomplished, the filtration is disrupted because the resistance of the filter cake gets too high; hence, too little of the mixture to be filtered can pass through the filter cake, and the filter becomes plugged or clogged. The specifications of the filter cake dictate the filtration method of choice.^[1]

See also

[edit]

• Filter press
• Press cake
• Tilting pan filter

References

[edit]

1. ^ "Technical Articles – BHS Filtration" (PDF). www.bhs-filtration.com. Archived from the original (PDF) on 2012-06-01. Retrieved 2018-08-31.

This hydrology article is a stub. You can help Wikipedia by adding missing information.

• v
• t
• e