Bi-quinary coded decimal

Bi-quinary coded decimal is a numeral encoding scheme used in many abacuses and in some early computers, notably the Colossus.^[2] The term bi-quinary indicates that the code comprises both a two-state (bi) and a five-state (quinary) component. The encoding resembles that used by many abacuses, with four beads indicating the five values either from 0 through 4 or from 5 through 9 and another bead indicating which of those ranges (which can alternatively be thought of as +5).

Several human languages, most notably Fula and Wolof also use biquinary systems. For example, the Fula word for 6, jowi e go'o, literally means five [plus] one. Roman numerals use a symbolic, rather than positional, bi-quinary base, even though Latin is completely decimal.

The Korean finger counting system Chisanbop uses a bi-quinary system, where each finger represents a one and a thumb represents a five, allowing one to count from 0 to 99 with two hands.

One advantage of one bi-quinary encoding scheme on digital computers is that it must have two bits set (one in the binary field and one in the quinary field), providing a built-in checksum to verify if the number is valid or not. (Stuck bits happened frequently with computers using mechanical relays.)

Several different representations of bi-quinary coded decimal have been used by different machines. The two-state component is encoded as one or two bits, and the five-state component is encoded using three to five bits. Some examples are:

• Roman and Chinese abacuses
• Stibitz^[3] relay calculators at Bell Labs from Model II onwards
• FACOM 128 relay calculators at Fujitsu

The IBM 650 uses seven bits: two bi bits (0 and 5) and five quinary bits (0, 1, 2, 3, 4), with error checking.

Exactly one bi bit and one quinary bit is set in a valid digit. The bi-quinary encoding of the internal workings of the machine are evident in the arrangement of its lights – the bi bits form the top of a T for each digit, and the quinary bits form the vertical stem.

Value	05-01234 bits[1]
0	10-10000
1	10-01000
2	10-00100
3	10-00010
4	10-00001
5	01-10000
6	01-01000
7	01-00100
8	01-00010
9	01-00001

The Remington Rand 409 has five bits: one quinary bit (tube) for each of 1, 3, 5, and 7 - only one of these would be on at the time. The fifth bi bit represented 9 if none of the others were on; otherwise it added 1 to the value represented by the other quinary bit. The machine was sold in the two models UNIVAC 60 and UNIVAC 120.

Value	1357-9 bits
0	0000-0
1	1000-0
2	1000-1
3	0100-0
4	0100-1
5	0010-0
6	0010-1
7	0001-0
8	0001-1
9	0000-1

The UNIVAC Solid State uses four bits: one bi bit (5), three binary coded quinary bits (4 2 1)^{[4][5][6][7][8][9]} and one parity check bit

Value	p-5-421 bits
0	1-0-000
1	0-0-001
2	0-0-010
3	1-0-011
4	0-0-100
5	0-1-000
6	1-1-001
7	1-1-010
8	0-1-011
9	1-1-100

The UNIVAC LARC has four bits:^[9] one bi bit (5), three Johnson counter-coded quinary bits and one parity check bit.

Value	p-5-qqq bits
0	1-0-000
1	0-0-001
2	1-0-011
3	0-0-111
4	1-0-110
5	0-1-000
6	1-1-001
7	0-1-011
8	1-1-111
9	0-1-110

• Binary-coded decimal
• Binary number
• Chisanbop
• FACOM 128
• Finger binary
• Quinary
• Two-out-of-five code

• Military Handbook: Encoders - Shaft Angle To Digital (PDF). United States Department of Defense. 1991-09-30. MIL-HDBK-231A. Archived (PDF) from the original on 2020-07-25. Retrieved 2020-07-25. (NB. Supersedes MIL-HDBK-231(AS) (1970-07-01).)